Wastewater Treatment System

MBR system combining a suspend growth biological reactor with solids removal thru filtration.

Wastewater Treatment System

Membrane-Bio-Reactor (MBR) Treatment

Super Tower Industries offers an eco-friendly system for customer to reduce the water usage in the building. The recycling water is suitable for

  • Expansion tank (cooling)
  • Make-up tank (cooling)
  • Toilet flushing (Potable tank)
  • Cleaning
  • landscaping

MBR system combining a suspend growth biological reactor with solids removal thru filtration. The membrane can be designed for and operate in small spaces and high removal efficiency of contaminants and total suspended solids. The membrane filtration system in effect can replace the secondary clarifier and sand filters in a typical sludge treatment system.

Picture10
img10

Rainwater Harvesting System

4 important cleaning steps

1. Cleaning Step

The first cleaning step is the filtration with the mechanical filter, which retains particles in the water because of its mesh size. The pre-treated water enters the rainwater tank.

2. Cleaning Step

Small particles flow through the filter, heavier particles fall down to the bottom, lighter particles (flower pollen) rise to the surface and float there. Prevents disturbance of settled sedimentation layer and supplies the lower part of the rainwater tank with oxygen.

3. Cleaning Step

The above floating particles (flower pollen) leave the rainwater tank with the next overflow because your overflow siphon sucks up your water surface. This process is named skimmer effect. The siphon at the same time fomrs an odor trap and a rodent barrier.

4. Cleaning Step

The cleanest water in the rainwater tank is 15 cm above the sediment layer and 10 cm below the water surface and is removed from there with a floating pump intake. This is done either with a submersible pump installed inside your rainwater tank or a suction and pressure pump inside the house.

Contact Us

37 thoughts on “Wastewater Treatment System

Leave a Reply